YouTube
Instagram

Municipal Packaged Pump Stations

Fluidtec package pump stations are ideal for use in residential and commercial subdivisions where a gravity connection is not possible.
They are supplied to site fully built up complete with pumps, pipework, valves, control gear, pump protection, lids, inlet pipe and tank.
Constructed from fibreglass the tanks are custom designed on a case by case basis and are able to be installed at depths of 12m deep. Standard pump station diameters are:

  • 1200mm
  • 1500mm
  • 1800mm
  • 2100mm
  • 2500mm
  • 3000mm
  • 4000mm

Custom diameters and builds are also available.
These units have an integral valve chamber making installation much easier.

Category:

Description

Fluidtec packaged pump stations are ideal for use in residential and commercial subdivisions where a gravity connection is not possible.
They are supplied to site fully built up complete with pumps, pipework, valves, control gear, pump protection, lids, inlet pipe and tank.
Constructed from fibreglass the tanks are custom designed on a case by case basis and are able to be installed at depths of 12m deep. Standard pump station diameters are:

  • 1200mm
  • 1500mm
  • 1800mm
  • 2100mm
  • 2500mm
  • 3000mm
  • 4000mm

Custom diameters and builds are also available.
These units have an integral valve chamber making installation much easier.

Fluidtec Packaged Pump Stations are factory designed, built and assembled in our manufacturing facilities and are delivered to site ready to be lowered into the ground. Compared to a conventional concrete pump station typical onsite site work is thus restricted to:

  1. Lowering in the one-piece pump station (valves and pipework are already installed)
  2. Connect the outlet pipe with single flange
  3. Lowering the pumps down (only because we cannot transport the pump station with them)

 

Note we will have a picture of the pump station here as a cutaway showing the below points:

  1. Integral valve chamber – easy installation and simple valve removal
  2. One piece Fibreglass tank – zero infiltration, lightweight, designed for complete immersion and impervious to H₂S corrosion.
  3. 60° sludge batter incorporated into the base of the chamber to prevent solids build up
  4. Hinged safety grate under the wet well opening
  5. Preassembled pipework from the pump auto-coupling to external discharge flange
  6. Dismantling elbow – simple valve removal
  7. Tank internals have a white gelcoat coating enabling easy cleaning and also making visual inspections easy.

Where you need to design/install a pumping station for project where the Council will take this over, please consider
one of our FRP Package Pumpstations.
Typical applications are:

  1. Residential Developments
  2. Commercial / Industrial Developments
  3. Retro-fit / upgrade existing pumpstations

 

We have our FRP Pumpstations approved / supplied into the following Councils/Municipalities:

  1. Far North District Council
  2. Kaipara District Council.
  3. Whangarei District Council
  4. Auckland Council
  5. Watercare Services
  6. Veolia Water
  7. Thames Coromandel District Council
  8. Waikato District Council
  9. Hamilton City Council
  10. Matamata Piako District Council
  11. Waipa District Council
  12. Western Bay of Plenty District Council
  13. Tauranga City Council
  14. Rotorua District Council
  15. Gisborne District Council
  16. Palmerston North City Council
  17. Kapiti Coast District Council
  18. Hutt City Council
  19. Grey District Council
  20. Christchurch City Council
  21. Queenstown Lakes District Council

 

Riverside Gardens – Wastewater Packaged Pumpstation

Oruarangi Road – Wastewater Packaged Pumpstation

Okura River Road – Wastewater Packaged Pumpstation

Kingseat Road – Wastewater Packaged Pumpstation

Harbour Ridge Drive – Wastewater Packaged Pumpstation

Grove Road – Wastewater Packaged Pumpstation

Menu